4
D-STAR OPERATION
4-16
D Requesting repeater information
When you send the repeater information command,
an ID message is sent back.
1. Hold down [DR] for 1 second to display the DR
screen.
2. Select “TO,” then push [ï].
• Displays the TO SELECT screen.
L On the DR screen, pushing [DR] toggles between
“FROM” and “TO.”
3. Rotate [DIAL] to select “Reflector,” then push [ï].
• Displays the REFLECTOR screen.
4. Select “Repeater Information,” then push [ï].
• Returns to the DR screen, and “Repeater Information”
and “I” are displayed in “TO.”
5. Hold down [PTT] to send the repeater information
command.
• Displays while transmitting.
6. Release [PTT] to hear the repeater ID message.
Connecting to a Reector (Continued)
To Next Page
Loading...
