Icom ID-4100A - Initializing the Installed Bluetooth Unit

12
Bluetooth
®
OPERATION
12-17
You can initialize the installed UT-137 Bluetooth
®
unit.
You should initialize the unit if you have trouble during
Bluetooth operation.
When you do a partial reset or all reset, the Bluetooth
settings returns to their factory defaults. However,
the device name and pairing/connection information
remain.
Bluetooth Set > Initialize Bluetooth Device
1. Push [MENU].
2. Rotate [DIAL] to select “Bluetooth Set,” then push
[ï].
3. Select “Initialize Bluetooth Device,” then push [ï].
• The conrmation dialog “Initialize Bluetooth Device?”
is displayed.
4. Select <YES>, then push [ï].
• Resets the installed UT-137’s settings to their factory
defaults, and returns to the standby display.
Initializing the installed Bluetooth
®
unit
Previous view