Icom ID-4100A

4
D-STAR OPERATION
4-20
<Fourth page>, <Fifth page>, <Sixth page>
Displays the position data of the caller station. If a
received signal has no data, then no position data
is displayed.
6. Push [MENU].
• Returns to the standby screen.
JG3LUK calling
to JM1ZLK on
JP3YHH port A...
JG3LUK calling
to JM1ZLK on
JP3YHH port A...
JG3LUK calling
to JM1ZLK on
JP3YHH port A...
CALLER
YOUR STATION
RX RPT1RX RPT2
CALLED
JG3LUK calling
to JM1ZLK on
JP3YHH port A...
JG3LUK calling to
JM1ZLK on
JP3YHH port A...
INTERNETINTERNET
JG3LUK calling to
JM1ZLK on
JP3YHH port A...
CALLED
RX RPT2
RX RPT1
CALLER
YOUR STATION
GW
TIP: “RX RPT1” setting may differ, depending on the way the call was made.
Example: When a Local area call is received. Example: When a Gateway call is received.
Viewing the received call signs
TIP: To delete the RX HISTORY data
On the RX HISTORY or the detail screen, push
[QUICK], then select “Delete.”
D View the call signs in the RX History screen (Continued)
Previous view