10
OTHER FUNCTIONS
10-7
D Home channel setting
1. Select a mode (VFO or Memory) or the DR screen
in which you want to set the Home channel.
2. Select a frequency to be set as the Home
channel.
L On the DR screen, select “FROM.”
3. Push [QUICK].
4. Rotate [DIAL] to select “Home CH Set,” then push
[ï].
5. Select an option, then push [ï].
L In the VFO mode, select “Set Frequency,” in the
Memory mode, select “Set Channel.” or on the DR
screen, select “Set Repeater.”
Home channels are often-used frequencies you can
preset in the transceiver’s VFO mode, Memory mode
and DR function. Select the Home channel by just
pushing [HOME] in each mode.
TIP: Selecting “Clear” in step 4 clears the Home
channel setting.
Home channel function
D Home channel operation
1. Select a mode (VFO or Memory) or the DR
screen in which you want to select the Home
channel.
2. Push [HOME] on the microphone.
• Selects the Home channel of the selected mode or DR
screen.
D Home CH Beep function
When the specied Home CH is selected by rotating
[DIAL], a beep sounds.
You will know the Home CH selection without looking
at the display.
L You can turn OFF the Home CH Beep function on
the MENU screen.
(Sounds > Home CH Beep)
To Next Page
Loading...
