Icom ID-4100A - Usable Characters

INTRODUCTION
v
Entering and editing text (Continued)
D Usable characters
The usable characters and symbols, and the maximum characters differ, depending on the item.
See the following list for details.
L The usable characters and symbols for each character type are described at the bottom of the page.
Category Item Character type
Maximum
characters
Information Reference
Manage Memory
Memory name [AB] [ab] [12] [!”#] 16 – p. 1-10
Bank name [AB] [ab] [12] [!”#] 16 – p. 1-11
Program scan Scan name [AB] [ab] [12] [!”#] 16 – p. 2-9
P-LINK Scan Link name [AB] [ab] [12] [!”#] 16 – p. 9-20
My Station TX Message [AB] [ab] [12] [!”#] 20 – p. 4-17
GPS TX Mode
Unproto Address [AB] [ab] [12] [!”#] 56
Normally 12 characters
(API410,DSTAR*)
p. 5-15
p. 5-17
p. 5-21
Comment [AB] [ab] [12] [!”#] 43
The number of characters you
can enter differs, depending on
the data extension and altitude
settings.
p. 5-16
p. 5-18
p. 5-22
Object Name
Item Name
[AB] [ab] [12] [!”#] 9 – p. 5-17
GPS Message [AB] [ab] [12] [!”#] 20 – p. 5-26
SD Card
Save Setting [AB] [ab] [12] [!”#] 20
Illegal characters:
/ : ; * < >
p. 6-4
Export [AB] [ab] [12] [!”#] 20
Illegal characters:
/ : ; * < >
p. 6-9
Bluetooth Set Device name [AB] [ab] [12] [!”#] 8 Except for “ICOM BT-” p. 9-72
Repeater List
Group name [AB] [ab] [12] [!”#] 16 – p. 4-41
Repeater name [AB] [ab] [12] [!”#] 16 – p. 4-34
Sub name [AB] [ab] [12] [!”#] 8 – p. 4-34
Call sign A to Z, 0 to 9, /, space 8 – p. 4-34
GW Call sign A to Z, 0 to 9, /, space 8 – p. 4-34
CS screen
UR A to Z, 0 to 9, /, space 8 – p. 9-41
R1 A to Z, 0 to 9, /, space 8 – p. 9-41
R2 A to Z, 0 to 9, /, space 8 – p. 9-41
My Call Sign Call sign A to Z, 0 to 9, /, space 12 (+1)
Includes “/” between the Call
sign and Memo field.
p. 9-47
Your Call sign
Name [AB] [ab] [12] [!”#] 16 – p. 4-43
Call sign A to Z, 0 to 9, /, space 8 p. 4-43
GPS Memory
Memory name [AB] [ab] [12] [!”#] 16 – p. 5-27
Group name [AB] [ab] [12] [!”#] 16 – p. 5-30
DR screen
Direct Input (UR) A to Z, 0 to 9, /, space 8 – p. 4-11
Direct Input (RPT) A to Z, 0 to 9, /, space 8 – p. 4-12
DTMF Memory DTMF code 0 to 9, A, B, C, D, *, # 24 – p. 10-8
[AB]: A to Z, (space)
[ab]: a to z, (space)
[12]: 0 to 9, (space)
[!”#]: ! " # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
Previous view