Icom ID-4100A

1
MEMORY OPERATION
1-12
The transceiver has two Memory name display types.
1. Push [V/M] several times until you enter the
Memory mode.
2. Push [QUICK].
3. Rotate [DIAL] to select “Display Type,” then push
[ï].
4. Select the display type, then push [ï].
• Freq:
Displays the large font sized frequency and small
font sized memory name.
• Name:
Displays large font sized memory name and a
small font sized frequency.
Selecting a Memory name display
Entered memory content can be cleared.
Manage Memory > Memory CH
1. Push [MENU].
2. Rotate [DIAL] to select “Manage Memory,” then
push [ï].
• Displays the MANAGE MEMORY screen.
L You can display the MANAGE MEMORY screen by
pushing [MW] on other than the DR screen.
3. Select “Memory CH,” then push [ï].
4. Select “ALL,” then push [ï].
• Displays the ALL screen.
5. Rotate [DIAL] to select the Memory channel to be
cleared, then push [QUICK].
6. Select “Clear,” then push [ï].
• The conrmation dialog “Clear?” is displayed.
7. Select <YES>, then push [ï].
• Beeps sound, and clears the memory content.
Clearing a Memory channel
[DIAL]
[ ]
[V/M] [QUICK]
[MENU]
Previous view