Icom ID-4100A - Deleting a Bluetooth Device from the Pairing List

12
Bluetooth
®
OPERATION
12-15
You can delete a Bluetooth device from the pairing list.
Before deleting a connected Bluetooth device,
disconnect it.
Bluetooth Set > Pairing/Connect
1. Push [MENU].
2. Rotate [DIAL] to select “Bluetooth Set,” then push
[ï].
3. Select “Pairing/Connect,” then push [ï].
4. Select the Bluetooth device, then push [QUICK].
5. Select “Delete,” then push [ï].
• The conrmation dialog “Delete?” is displayed.
6. Select <YES>, then push [ï].
• Deletes the selected device from the pairing list.
Deleting a Bluetooth
®
device from the pairing list
TIP: To connect to the deleted device again, you
must rst pair with it again.
Pairing with a headset:
p. 12-3
Pairing with an Android device: p. 12-10
Pairing with an iOS device: p. 12-12
Previous view