10
OTHER FUNCTIONS
10-2
You can select a squelch delay in the MENU screen to
prevent repeated opening and closing of the squelch
while receiving the same signal.
Function > Squelch Delay
1. Push [MENU].
2. Rotate [DIAL] to select “Function,” then push [ï].
3. Select “Squelch Delay,” then push [ï].
4. Select an option.
• Short: Short squelch delay.
• Long: Long squelch delay.
5. Push [MENU].
• Returns to the standby screen.
The transmit power level and the RF meter displays
are shown below.
LOW MID HIGH
RF meter
(TX display)
Power level
(at TX)
5 W 15 W 25/50 W*
*Depending on the transceiver version.
Selecting a Squelch delay
Transmit power levels and RF meter
TIP: To change the transmit power level
Push [QUICK], then select “TX Power.”
To Next Page
Loading...
