Icom ID-4100A

12
Bluetooth
®
OPERATION
12-14
There are 3 ways to disconnect from a Bluetooth
device (headset device or data device).
• Turn OFF a headset
• Turn OFF the Bluetooth on a data device
L See the instruction manual of the headset or a data
device for details.
Or, you can disconnect from a Bluetooth device
without canceling the pairing, as described below.
Bluetooth Set > Pairing/Connect
1. Push [MENU].
2. Rotate [DIAL] to select “Bluetooth Set,” then push
[ï].
3. Select “Pairing/Connect,” then push [ï].
4. Select the Bluetooth device, then push [ï].
• The conrmation dialog “Disconnect?” is displayed.
5. Select <YES>, then push [ï].
“ ” disappears
• The transceiver disconnects from the Bluetooth
device, and “
” disappears from the list. However, the
transceiver is still paired with the device.
L When you select the unconnected device
displayed in the pairing list, the transceiver displays
“Connect?.” To connect to the device, select <YES>.
Disconnecting from a Bluetooth
®
device
Previous view