Icom ID-4100A

4
D-STAR OPERATION
4-28
D DV Fast Data function
To send data using the DV Fast Data function, do the
following.
L The DV Fast Data communication can be made by
only the following Icom transceivers: ID-4100A/E,
ID-5100A/E*, or ID-51A/E (PLUS, PLUS2, 50th
Anniversary model). (As of April 2017)
* Usable only when rmware versions CPU M 1.10, S
1.00, C 1.10, and DSP 1.10 or later are installed.
TIP: The DV Fast Data function can also be used
when you operating the transceiver through the RS-
MS1A or RS-MS1I remote control software.
L The optional UT-137 Bluetooth unit is required.
Bluetooth
Android
or iOS
device
Transceiver with
the Bluetooth unit
UT-137
Data communication (Continued)
DV Set > DV Fast Data > Fast Data
1. Push [MENU].
2. Rotate [DIAL] to select “DV Set,” then push [ï].
3. Select “DV Fast Data,” then push [ï].
4. Select “Fast Data,” then push [ï].
5. Select “ON,” then push [ï].
6. Push [MENU].
• Returns to the standby screen.
NOTE: When using DV Fast Data function, if you
want to send GPS data to other transceivers that can
receive only slow speed data, set “GPS Data Speed”
to “Slow.” (p. 9-49)
(DV Set > DV Fast Data > GPS Data Speed)
Previous view