9
MENU SCREEN
9-47
My Call Sign
My Station > My Call Sign
The transceiver has a total of 6 memories to save
your own call signs.
You can enter a call sign of up to 8 digits. Also, a note
of up to 4 characters, for operating radio type, area,
and so on, can be entered.
L See the D-STAR guide for MY call sign entry.
L To select other My Call Sign, rotate [DIAL] to select,
then push [ï] on the MY CALL SIGN screen.
TX Message
My Station > TX Message
The transceiver has a total of 5 memories to save
short messages for simultaneous transmission in the
DV mode.
Enter a message of up to 20 alphanumeric characters
for each memory.
L See page 4-17 for TX message entry.
L To select other TX message, rotate [DIAL] to select,
then push [ï] on the TX MESSAGE screen.
TIP: To transmit no message, select “OFF.”
My Station items
To Next Page
Loading...
