Icom ID-4100A

10
OTHER FUNCTIONS
10-6
D Transmitting the recorded voice audio
NOTE: Be sure to insert a microSD card into the
transceiver.
Voice TX > <<TX>>
1. Push [MENU].
2. Rotate [DIAL] to select “Voice TX,” then push [ï].
3. Select “<<TX>>,” then push [ï].
4. Select the memory number, “T1” ~ “T4,” then push
[ï].
• The recorded voice audio is transmitted once.
InformationL
• While transmitting, the SD card icon blinks.
• When you select “T1 (Repeat TX)” ~ “T4 (Repeat
TX)” in step 4, the transceiver repeatedly transmits
the recorded voice audio for up to 10 minutes at the
interval specied in “Repeat Time.”
• Push [PTT] to cancel a recorded voice transmission.
TIP: To send the recorded voice audio in the Quick
Menu window, push [QUICK], then select “Voice TX.”
D Changing the voice TX settings
You can change the voice TX settings on the MENU
screen. (p. 9-23)
Setting the Repeat Time
Set the repeat interval for the voice repeat
transmission.
The transceiver repeatedly transmits the recorded
voice audio at 5 second intervals as the default.
Voice TX > TX Set > Repeat Time
Using the TX Monitor function
The TX voice audio is output from the speaker as the
default. (Default: ON)
Voice TX > TX Set > TX Monitor
Voice TX function (Continued)
Previous view