Icom ID-4100A - D about the Icom Headset (VS-3)

12
Bluetooth
®
OPERATION
12-7
Other settings of the headset (Continued)
D About the Icom headset (VS-3)
You can set the detailed settings of the optional VS-3
Bluetooth headset.
Also, you can assign a key function to [PLAY], [FWD],
and [RWD] on the VS-3’s “Custom Key” screen.
Power Save screen
The Power Save function temporarily disconnects the
Bluetooth connection if no communication or operation
is performed for 120 seconds. (p. 9-70)
The Power Save function is disabled when the VOX
function is ON.
One-Touch PTT screen
The One-Touch PTT function enables you to select
transmission and reception by pushing [PTT].
PTT Beep screen
Set the beep to sound when you push [PTT] on the
VS-3. (p. 9-70)
Custom Key Beep screen
Set the beep to sound when you push [PLAY], [FWD]
or [RWD] on the VS-3. (p. 9-70)
Custom key screen
You can assign a key function to [PLAY], [FWD] and
[RWD] on the VS-3. (p. 9-71)
[FWD]
[PLAY]
[RWD]
Optional VS-3
Bluetooth headset
“Custom Key” screen
Previous view