Icom ID-4100A

9
MENU SCREEN
9-13
Menu items and Default settings (Continued)
SD Card*
1
Sets the microSD card options.
Load Setting
File selection ALL, Except My Station, or
Repeater List Only
Loads the settings le to the transceiver.
Save Setting
<<New File>> Saves the settings as a new le.
File selection Saves the settings in a selected le.
Import/Export
Import Your Call Sign, Repeater List, or
GPS Memory
Imports the Your call sign, Repeater list, or
GPS memory data in the CSV format le.
Export Your Call Sign, Repeater List, or
GPS Memory
Exports the Your call sign, Repeater list, or
GPS memory data in the CSV format le.
CSV Format
Separator/Decimal Sep [,] Dec [.]*
2
, Sep [;] Dec [.],
or Sep [;] Dec [,]
Selects the separator and the decimal
character for the CSV format.
Date yyyy/mm/dd, mm/dd/yyyy*
2
, or
dd/mm/yyyy
Selects the date format.
SD Card Info Displays the free space and remaining
recording time of the card.
Firmware Update Enters the Firmware Update mode.
Format Formats the card.
Unmount Electronically unmounts the card.
Bluetooth Set*
3
Sets the Bluetooth options.
Bluetooth OFF or ON Turns the Bluetooth function ON or OFF.
Auto Connect OFF or ON Selects whether or not to automatically
connect to a paired Bluetooth device when the
device is turned ON.
Pairing/Connect Pairs or connects to a Bluetooth device.
Device Search
Search Headset Searches for Bluetooth headsets.
Search Data Device Searches for Bluetooth data devices.
Pairing list Displays paired devices.
<<Pairing Reception>> Accepts the connection request from a
Bluetooth device.
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
*
1
Be sure to insert the microSD card into the transceiver before selecting these items.
*
2
The default value may differ, depending on the transceiver version.
*
3
The optional UT-137 Bluetooth unit is required.
Previous view