9
MENU SCREEN
9-15
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Others Set other options.
Information
Voltage Displays the power source voltage.
Version Displays the transceiver’s rmware version
number.
Clone
Clone Mode Reads or writes the CS-4100 data from or to
the PC.
Reset
Partial Reset Returns all settings to their defaults, without
clearing the memory contents, call sign
memories or repeater lists.
All Reset Clears all entries and memories, and returns
all settings to their defaults.
To Next Page
Loading...
