9
MENU SCREEN
9-28
Object Name
GPS > GPS TX Mode > D-PRS > TX Format > Object
> Object Name
Enter an Object name of up to 9 characters.
Data Type (Default: Live Object)
GPS > GPS TX Mode > D-PRS > TX Format > Object
> Data Type
Set the Object’s status.
• Live Object: The Object is valid.
• Killed Object: The Object is invalid.
Symbol (Default: Radio)
GPS > GPS TX Mode > D-PRS > TX Format > Object
> Symbol
The symbol is an icon which represents Object’s
means of transportation or location. The saved symbol
is transmitted along with the position data while in the
D-PRS mode.
See page 9-25 for the s
ymbol list.
Editing a symbol
1. Push [QUICK].
2. Rotate [DIAL] to select “Direct Input,” then push
[ï].
3. Push [MW] to move the cursor to the second digit,
or push [MODE] to move the cursor to the first
digit.
4. Rotate [DIAL] to select a character or symbol to
the selected digit.
Selectable characters and symbols
<For the rst digit>
/, \, 0 to 9, A to Z
<For the second digit>
A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
5. Push [ï] to set the symbol.
Selecting a preset symbol
1. On the “Symbol” screen, rotate [DIAL] to select
the symbol.
2. Push [ï] to set the symbol.
Comment
GPS > GPS TX Mode > D-PRS > TX Format > Object
> Comment
Enter a comment.
The number of characters you can enter differs,
depending on the Data Extension and Altitude data
entry.
Data Extension Altitude
Characters
entered
(maximum)
OFF — 43 (Default)
OFF Entered 35
Course/Speed — 36
Course/Speed Entered 28
Power/Height/Gain/Directivity
— 36
Power/Height/Gain/Directivity
Entered 28
The symbol “
” shows the transmittable comment
range. Please note that the characters that exceed the
range will not be transmitted.
Transmittable comment range display
(In case of up to 28 characters)
GPS items (Continued)
To Next Page
Loading...
