Icom ID-4100A

13
UPDATING THE FIRMWARE
13-3
These instructions are based on Microsoft
®
Windows
®
10.
Step 1. Downloading the rmware le
1. Access the following URL.
http://www.icom.co.jp/world/index.html
2. Click <Support>.
Click
3. Click the “Firmware Updates/Software
Downloads” link.
Click
4. Click the firmware file link in the ID-4100A/E
group.
5. Read “Regarding this Download Service”
carefully, and then click <Agree>.
Click
6. Click <Save as>.
Click
7. Select the location where you want to save the
firmware, and then click <Save>.
(Example: Desktop)
Click
• The le starts downloading.
L The rmware and the rm utility are compressed in a
“zip” format folder.
8. Right-click the downloaded firmware folder (zip
format).
9. Click “Extract All...”
Click
10. Select the location where you want to create the
unzipped folder, then click <Extract>.
(Example: Desktop)
Click
• After unzipping, a folder is created in the specied
location.
L In the “4100E_MM*” folder, “4100E_MM*.dat” is
created.
* “MM” represents the release number.
Step 2: Inserting the microSD card into a PC
NOTE: To use the microSD card with the transceiver,
format the card, even preformatted microSD cards
for PCs or other uses. See Basic manual section 7
for details.
1. Turn OFF the transceiver, then remove the
microSD card.
2. Insert it into the microSD card drive or a memory
card reader* on your PC.
*User supplied.
Transceiver
microSD
card
PC
To the memory
card reader
Updating the rmware
☞ Continued on the next page.
Previous view