13
UPDATING THE FIRMWARE
13-5
6. Carefully read all the displayed precautions.
After you read and agree with all them, select
<YES>, then push [ï].
• The updating starts.
InformationL
• To cancel the updating, select <NO>.
• The transceiver reads the rmware le from the
microSD card and writes it to the main CPU, sub CPU,
DSP, and the controller CPU.
• Downloading and loading status are displayed in the
dialogs.
7. The firmware updating has completed, the
transceiver will automatically restart. And then,
returns to the standby screen.
TIP:
•
To check the rmware version after the updating,
see “Checking the rmware version” for details.
(p. 13-2)
•
To delete the rmware le on the microSD
card, push [QUICK], then select “Delete” on the
FIRMWARE UPDATE screen.
Updating the rmware (Continued)
To Next Page
Loading...
