2
SCAN OPERATION
2-10
14. Select “MODE,” then push [ï].
• Displays the selectable mode.
15. Select the receive mode to be used during a scan.
L When you select “---,” the receive mode set in the
VFO mode is used during a scan.
16. Select “<<Write>>,” then push [ï].
• The conrmation dialog “Write?” is displayed.
17. Select <YES>, then push [ï].
• Beeps sound, and automatically writes into the
selected scan edge channel.
• Returns to the PROGRAM SCAN EDGE screen.
Entering scan edges (Continued)
To Next Page
