3
PRIORITY WATCH
3-2
While operating on a VFO frequency, using the DR
function or while scanning, Priority watch checks for
signals on a selected frequency every 5 seconds.
Priority watch
D Starting the Priority watch
To start the Priority watch, select “ON” or “Bell,” as
described below.
1. Push [QUICK].
2. Rotate [DIAL] to select “PRIO Watch,” then push
[ï].
3. Select an option, then push [ï].
• ON: Starts Priority Watch.
When a signal is received on the Priority
channel, the channel is automatically
selected.
• Bell: Starts Priority Watch.
When a signal is received on the Priority
channel, the “S” icon blinks.
• “P” is displayed, and the Priority watch starts.
D Canceling the Priority watch
1. Push [QUICK].
2. Rotate [DIAL] to select “PRIO Watch OFF,” then
push [ï].
• “P” disappears, and the Priority watch is canceled.
To Next Page
Loading...
