WAFER-LX Motherboard
Page 88
USB-HDD
LAN
Disabled
Î Boot Other Device [Enabled]
Use the Boot Other Device option to determine whether the system uses a second or
third boot device if the first boot device is not found.
Î
Disabled
The system does not look for second and third boot
devices if the first one is not found.
Î
Enabled DEFAULT
The system looks for second and third boot devices if the
first one is not found.
Î Boot Up Floppy Seek [Disabled]
Use the Boot Up Floppy Seek option to enable the BIOS to determine if the floppy disk
drive installed has 40 or 80 tracks during the POST. 360K FDDs have 40 tracks while
760K, 1.2M and 1.44M FDDs all have 80 tracks.
Î
Disabled DEFAULT
BIOS does not search for the type of FDD drive by track
number. Note that there is no warning message if the
drive installed is 360K.
Î
Enabled
BIOS searches for a FDD to determine if it has 40 or 80
tracks. Note that BIOS cannot tell the difference between
720K, 1.2M or 1.44M drives as they all have 80 tracks.
Î Boot Up Numlock Status [On]
Use the Boot Up Numlock Status option to specify the default state of the numeric
keypad.
Î
Off
The keys on the keypad are not activated.
Î
On DEFAULT
Activates the keys on the keypad.
To Next Page
Loading...
Need help?
General
