WAFER-LX Motherboard
Page 87
Î
Enabled
The system can be booted from a remote system
through the LAN.
Î SATA Boot ROM Control [Disabled]
Use the SATA Boot ROM Control option to configure SATA IDE use in DOS mode.
Î
Disabled DEFAULT
Disables SATA IDE use in DOS mode.
Î
Enabled
Enables SATA IDE use in DOS mode.
Î Boot Device
Use the Boot Device options to select the order of the devices the system boots from.
There are three boot device configuration options:
First Boot Device [Default: HDD-0]
Second Boot Device [Default: CDROM]
Third Boot Device [Default: SCSI]
Using the default values, the system first looks for a HDD to boot from. If it cannot find an
HDD, it boots from a CD-ROM. If both The HDD and the CD-ROM are unavailable, the
system boots from a SCSI drive.
Boot Device configuration options are:
Floppy
LS120
HDD-0
SCSI
CDROM
HDD-1
HDD-2
HDD-3
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
To Next Page
Loading...
Need help?
General
