Manual Page 59
B.6.5 Network Options
Touch Network Options to switch to the screen showing the preset network
configurations.
Three preset configurations can be stored and activated with the buttons Network 1 to
Network 3.
Picture 58: Parameters of Network Options
From the touchscreen, only the entry for File Name can be changed.
To change the entry, touch the respective line.
Chapter B.6.1 describes how the entry can be changed.
All other parameters must be changed from the Scan2Net user interface.
More information about the use of the Scan2Net interface can be found in chapter 0. and
its sub-chapter.
To Next Page
Loading...
