Intel® Server Board S1200BT Service Guide 19
2 Server Utilities
Using the BIOS Setup Utility
This section describes the BIOS Setup Utility options, which is used to change server
configuration defaults. You can run BIOS Setup with or without an operating system
being present. See “Additional Information and Software” for a link to the Technical
Product Specification where you will find details about specific BIOS setup screens.
Starting Setup
To enter the BIOS Setup using a keyboard (or emulated keyboard); press the <F2>
function key during boot time when the OEM or Intel
®
logo is displayed. The following
message is displayed on the diagnostics screen and under the Quiet Boot logo screen:
Press <F2> to enter setup
When the Setup Utility is entered, the Main screen is displayed. However, serious errors
cause the system to display the Error Manager screen instead of the Main screen.
Setup Navigation Keyboard Commands
The bottom right portion of the Setup screen provides a list of commands that are used to
navigate through the Setup utility. These commands are displayed at all times.
Each Setup menu page contains a number of features. Each feature is associated with a
value field, except those used for informative purposes. Each value field contains
configurable parameters. Depending on the security option chosen and in effect by the
password, a menu feature’s value may or may not be changed. If a value cannot be
changed, its field is made inaccessible and appears grayed out.
Table 5. BIOS Setup: Keyboard Command Bar
Key Option Description
<Enter> Execute Command The <Enter> key is used to activate submenus when the
selected feature is a submenu, or to display a pick list if a
selected option has a value field, or to select a subfield for
multi-valued features like time and date. If a pick list is
displayed, the <Enter> key selects the currently
highlighted item, undoes the pick list, and returns the
focus to the parent menu.
To Next Page
Loading...
