Intel S1200BT User Manual

Intel® Server Board S1200BT Service Guide 47
Help Text:
Administrator password is used to control change access in the BIOS Setup utility.
Only alphanumeric characters can be used. Maximum length is seven characters and it is
case sensitive.
Note: Administrator password must be set in order to use the user account.
Comments:This option is only to control access to Setup. Administrator has full access to
all Setup options. Clearing the Administrator Password also clears the User Password.
4. Set User Password
Option Values: [Entry Field]
Help Text:
User password is used to control entry access to the BIOS Setup utility.
Only alphanumeric characters can be used. Maximum length is seven characters and it is
case sensitive.
Note: Removing the administrator password also automatically removes the user
password.
Comments:Available only if the Administrator Password is installed. This option protects
Setup settings as well as boot choices. The User Password only allows limited access to
the Setup options, and no choice of boot devices.
5. Front Panel Lockout
Option Values:Enabled
Disabled
Help Text:
If enabled, locks the power button and reset button on the system's front panel. If
[Enabled] is selected, power and reset must be controlled through a system management
interface.
Comments:Note: This option does not appear on all boards. See Section Error! Reference
source not found. for Product-Specific Information
6. TPM State
Option Values: <Displays current TPM Device State>
May be:
Enabled & Activated
Enabled & Deactivated

Intel S1200BT Specifications

General

Chipset	Intel C204
Socket	LGA 1155
Form Factor	ATX
Memory Type	DDR3
Max Memory	32 GB
Memory Slots	4
PCIe x16 Slots	1
PCIe x4 Slots	1
PCI Slots	2
SATA Ports	6
Ethernet Ports	2
PCIe x8 Slots	1
Network	Intel 82574L
RAID Support	0, 1, 5, 10