Intermec ED40 - Power-Up (VCC) Inrush Current to Active Idle; Power-Up with Power Enable Inrush Current

Appendix B — EA20X Imager
ED40 Decode Board Integration Guide 87
Power-Up with Power Enable Inrush Current
EA20X + ED40 Power-Up with power enable Inrush Current (RS-232): Power enable
switched from high to low.
Power-Up (Vcc) Inrush Current to Active Idle
EA20X + ED40 Power-Up (Vcc) Inrush Current to Active Idle (RS-232): Power enable low,
trigger high.