Invacare Kite - ACS 2 70; ACS 2 70 L; ACS 2 90 L Electronic Module; ACS 2 90 LG Electronic Module; ACT Actuator Module; ACT 2 Actuator Module

Invacare
®
- Kite
SERVICE MANUAL
19
4.2.1 ACS 2 70 / ACS 2 70L / ACS 2 90L electronic module
Connections
1) Battery 24V
2) Bus cable (to remote or ACT)
3) Bus cable (to remote or ACT)
4) Motor M1
5) Light (optional)
6) Motor M2
Rubber stoppers for free slots
2) & 3) Order number: 1552876
4.2.2 ACS 2 90LG electronic module
Connections
7) Battery 24V
8) Cable to G-Trac sensor (GYRO)
9) Bus cable (to remote or ACT)
10) Motor M1
11) Light
12) Motor M2
4.2.3 ACT actuator module
Different adjusting motors, also known as actuators, can be fitted to the mobility aid. These
actuators are either connected directly to the power module or to a separate actuator module. The
actuator module is connected to the power module via a bus cable.
4.2.3.1 ACT 2 actuator module
Connections
1) ACI*
2) Bus cable (ACT or power module)
3) Bus cable (ACT or power module)
4) Actuator - Channel 2
5) Actuator - Channel 1
Rubber stoppers for free slots
1) Order number: 1555701
2) & 3) Order number: 1552876
4) & 5) Order number: 1555700
* The ACI connection is used for actuator limitation or speed reduction.