Invacare Kite - Replacing the Headlight Bracket (Conventional Lighting System)

Invacare
®
- Kite
SERVICE MANUAL
59
8.7.6 Replacing the headlight bracket (conventional lighting system)
Requirements:
• TX25 Torx wrench
• Phillips screwdriver size 2
If the headlight does not need to be replaced:
• Loosen both Phillips screws (1).
• Detach the headlight (2) from its holder.
• Carefully put the headlight aside on its cable.
If the headlight does need to be replaced:
• Remove the headlight, as described in chapter 8.7.5.