iPECS LIP-9071 - Page 38

LIP-9071 iPKTS User Guide
25
5.5.7.1 NFC Call Forward
LIP-9071 can configure call forward of call settings by using an NFC Forum-compliant tag. Call forward is the same
feature as basic call forward.
User first needs to write call forward information to an NFC tag. NFC tag write is provided at the “NFC Call Feature” of
“Call Settings” menu.
Making NFC Call Forward tag
In order to make an NFC call forward tag, User must enter the following information for call forward feature.
1. Station Number (ID): station number.
2. Password: It must be configured by Web admin before setting Call Forward on LIP-9071.
3. Forward Type : There are four types (Unconditional, Busy, No Answer, Busy / No Answer)
4. Forward Destination: There are four destinations (Station, Group, Speed, Tel num).
5. Forward Number: Forward number.
After entering right information for each item, touch “Write” button, otherwise touch “Cancel” for cancel.
After touching “Write” button, the following screen is shown.
Then, tag the prepared NFC tag on the tag pad. User can cancel writing tag in this step by pressing “Close” button.