Error Messages
Error
Code
Error Message Description
140 Wrong type of parameter(s) The type of the parameter is
incorrect.
150 Wrong number of parameters The number of parameters is
incorrect.
160 Unmatched quotation mark
(single/double) in parameters
The quotation marks (single/
double) in the argument do not
match.
165 Unmatched bracket The parentheses do not match.
170 Command keywords were not
recognized
The command keyword is not
recognized, which is an invalid
command.
180 No entry in list to retrieve (num-
ber list or channel list)
The function entry is incorrect.
For example, three parameters
are sent to the command, and
the system program only proc-
esses two.
190 Too many dimensions in entry
to be returned in parameters
There are too many values re-
turned in the argument.
191 Too many char The number of characters ex-
ceeds the limit. For example,
when using serial port or USB
communication, the transmitted
data length is greater than 256.
-150 String data error The string data is incorrect.
-151 Invalid string data [e.g., END
received before close quote]
Invalid string data. For exam-
ple, the END flag was received
before the command reference
was closed.
-158 String data not allowed The data type is not allowed as
a string.
-160 Block data error Block data is incorrect.
-161 Invalid block data [e.g., END
received before length
satisfied]
Invalid block data. For exam-
ple, the END flag was received
before the data length met the
requirements.
Copyright © Itech Electronic Co., Ltd.
181
To Next Page
Loading...
Need help?
General
