Appendix A Test Results
OAM results
HST-3000 Ethernet Testing User’s Guide
283
Table 26 describes the Service Layer OAM LBM results.
LBM/LBR (Ping) must be Enabled to observe these results.
Total Tx Frames Count of the total number of AIS frames
transmitted since the last OAM setting
was specified or changed.
Total Rx Frames Count of the number of AIS frames
received since the last OAM setting
was specified or changed.
Unexpected Period ON indicates that an AIS was received
with the correct maintenance domain
level, maintenance association ID, and
maintenance end point ID, but with a
period value that was not the same as
the instrument’s AIS rate.
Table 26 S-OAM LBM test results
Result Description
Total Tx LBM
Frames
Count of the total number of LBM
frames transmitted since the last OAM
setting was specified or changed.
Total Rx LBR
Frames
Count of the number of LBR frames
received since the last OAM setting
was specified or changed.
Total Rx LBM
Frames
Count of the number of LBM frames
received since the last OAM setting
was specified or changed.
Total Tx LBR
Frames
Count of the total number of LBR
frames transmitted since the last OAM
setting was specified or changed.
Table 25 S-OAM AIS test results (Continued)
Result Description
To Next Page
Loading...
