Appendix A Test Results
OAM results
286
HST-3000 Ethernet Testing User’s Guide
Table 30 describes the Link Layer OAM Counts results.
Counts are provided for both transmitted and received frames
The Link OAM State must be On to observe these results.
Vendor OUI Displays the Vendor OUI (Organiza-
tionally Unique Identifier) for the instru-
ment’s peer.
Max PDU Size Displays the maximum PDU (Protocol
Data Units) size supported by the local
instrument.
Unidirectional Indicates whether the remote instru-
ment advertises that it provides unidi-
rectional support for failure detection.
Link Events Indicates whether the remote instru-
ment is configured to monitor link
events.
Remote Loopback Indicates whether the remote instru-
ment is operating in remote loopback
mode.
Variable Retrieval Indicates whether the remote instru-
ment supports sending Variable
Response OAM PDUs.
Revision Displays the current of the TLV (Type
Length Value) revision for the remote
instrument.
Table 30 L-OAM Counts test results
Tx and Rx Frame
Results
Description
Information A count of information frames transmit-
ted or received since starting the test.
Table 29 L-OAM Remote Op Mode test results
Result Description
To Next Page
Loading...
