JRC JLN-652 - Own Track Display (Track Plotting); Plot Display Setting

4-26
4.4.3 Own Track Display (Track Plotting)
・Function・ The track of the ship is plotted on the screen based on the location information of GPS or
speed information on the ship of the Doppler data.
The ship position is displayed on the plot screen by the ship shape mark. Moreover, the
speed and the course vector of the ship are displayed by a white solid line.
Operation Standard Menu: [MENU] key/Menu screen/Display setting ≫/[ENT] key/Plot screen ≫
/[ENT] key/Plot screen setting menu
Selection Frame Menu: [
□] key/ Enclose “Plot screen” with the frame /[MENU] key/Plot
drawing menu
Track Color
・Function・ The track color is displayed by one arbitrary color (It is possible to select it from among six
colors). Moreover, when "Strength" is selected, the classification display is done by four
stages by the scattered intensity of an arbitrary measurement layer (A, B, C, D, and E
layer).
Setting color: [Red Pink Yellow Green Blue White Strength]
Weak Scattered Intensity Strong
Scattered Intensity
１ ２ ３ ４
Display Color Sky Blue Pea Green Orange Brawn
Operation Standard Menu: Plot screen setting menu/Track color: White
Selection Frame Menu: Plot drawing menu/Track color: White
Track Color Standard
・Function・ When "Strength" is selected by the track color, the targeted measurement layer is selected
from the A-E layer.
Setting layer: [A Layer B Layer C Layer D Layer E Layer]
Operation Standard Menu: Plot screen setting menu/Track color standard: A Layer
Selection Frame Menu: Plot drawing menu/ Track color standard: A Layer
4.4.4 Plot Display Setting
・Function・ The latitude line and the longitude line are always displayed with the north up bearing
based on the reduced scale.
The latitude longitude at the ship position is displayed at the center under the screen. (*1)
Operation Standard Menu: [MENU] key/Menu screen/Display setting ≫/[ENT] key/Plot screen ≫
/[ENT] key/Plot screen setting menu
Selection Frame Menu: [
□] key/ Enclose “Plot screen” with the frame /[MENU] key/Plot
drawing menu
Background Color
・Function・ The background color of the [PLOT] screen is selected from the following set value.
Setting color: [Standard Black Navy Blue Gray White]
The background color of the track screen pairs with the background color of the plot
screen in the standard, and the background color of the plot screen is decided by the
background color of the track screen, too. The background color of the (track) screen is
set by screen brightness (*2) of the main menu.
Operation Standard Menu: Plot screen setting menu/Background color: Black
Selection Frame Menu: Plot drawing menu/Background color: Black
*1 Latitude longitude: When GPS is not connected, "***" is displayed.
*2 Refer to 3.3.1 “Adjusting Screen Brightness”.
▼
▼
▼