JRC JLN-652 User Manual

3-6
3.2 Menu Composition
In this device (current meter), the function to operate by the panel key and the knob of the keyboard is
provided, and, besides, the function to operate on the menu is provided.. The current meter can be used
more functionally by doing the setting to be suitable for the purpose.
There are two kinds of display methods of the menu about "Standard menu" and "Selection frame menu".
It is possible to set it from either, and the set value is common and saved. In the figure below, (**) is an
operation that pushes the key to which the keyboard corresponds.
*1 Depth setting in current measurement layer: Refer to 4.2.3 “Current Measurement Depth Setting”
*2 Selection of Beam Direction: Menu/Picture Setting/Fish It is set by ・Display Screen.
*3 Fish Screen Depth Range Setting Menu: It is displayed that the [DEPTH] key is pushed with the fish finder screen displayed.
Plot Screen
Graph Screen
Fish 1 Screen
1 Direction
Fish 2 Screen
2 Directions
Fish 3 Screen
4 Directions
【
CURR
】
Current Measurement Layer
Depth Setting
Numeric key input
Ａ Layer： TOP
Ｂ Layer： 20 m
Ｃ Layer： 30 m
Ｄ Layer： 50 m
Ｅ Layer： BTM
End by
【
DEPTH
】
key.
Fish Screen Depth Range Setting
Numeric key input
１： 20 m
２： 40 m
３： 80 m
４： 120 m
５： 160 m
６： 200 m
７： 250 m
８： 300 m
９： 350 m
０： 400 m
（*１）
Plot Screen Only
Move ship to
center of the
screen.
Menu
Display
from each
Screen
Manual Search by B.T
Ship Speed mode
【
SHIP
】
【
FISH
】
【
GRAPH
】
【
PLOT
】
【PRO
FILE】
【
DEPTH
】
Ship
Center
Bottom
Track
（*２）
（*３）
OR
OR
Initial Screen
Power ON
Current 1 Screen
Circle Graph Display
Current 2Screen
Numerical Display
Current 3 Screen
Echo Display
Ship Speed 1 Display
Ship Shape Vector
Display
Ship Speed 2 Display
Graph Display
【
DEPTH
】
End by
【
DEPTH
】
key.
Profile 1 Screen
Line Graph Display
Profile 2 Screen
Ellipse Graph
Display
Fish Screen Only
Bubble cancel
Knob
Sensitivity Knob
STC
GAIN
Menu Screen
Language:
English / Japanese
Display Brightness
Alarm Sound Volume
Initial Setting
Measurement Setting
Screen Setting
Standard Menu
Display/Setting
Select Frame Menu
Display /Setting
Selection
Frame
Key
Refer to 3.2.1.
Standard Menu
Composition
Refer to 3.2.2.
Selection Frame
Menu Composition
【
□
】
【
MENU
】
The frame of the displayed
data and each graph on
each screen (selection
frame) is displayed.
After the [MENU] key is
pushed, the menu
corresponding to the item
selected with the outside
frame is displayed.
The selection frame is
possible to move with
key.
It ends with 【
□
】 key.
/
▲ ▼
Profile 3 Screen
Upwelling Flow
Graph Display
STC knob
from
current
measurem
ent
Screen
STC
Simple
Filter
setting

JRC JLN-652 Specifications

General

Brand	JRC
Model	JLN-652
Category	Measuring Instruments
Language	English