JRC JLN-652 User Manual

9-9
9
9.2.2 Warning History Screen
・Function・ The warning history screen is displayed from the submenu of the self test screen.
100 histories or less of past "Warning" are displayed on the warning history screen.
Operation Standard Menu: “Installation setting” menu/Self Test≫/[ENT] key/Self Test screen
/Warning history≫(Upper part)/ [ENT] key/Warning history screen
Number: It is a serial number. Large number is displayed a new warning and the number
is displayed up to 100 warnings. When the 100 warnings are exceeded, it deletes from the
old one at the date one by one.
Date and Time: The date and time when an Warning generates or was released are
recorded. It is necessary to connect GPS to display the date and time. (*1)
Warning Number: It corresponds to "Number" of the Self Test screen. Ex.) 3-03: Analog
system/high-voltage power supply.
NG/OK: When an Warning is generated, "NG" is displayed. When normally returning by
reactivation and the repair, "OK" is displayed.
Item: It synchronizes with the warning number, and "Item" content of the self test screen is
recorded. (*2)
Remarks: It synchronizes with the warning number, and "Result" content of the self test
screen (State when warning is recorded. (*2)
Warning History
Remarks
No.
Date
Time
Warning Number
NG
／
OK
Item
Remarks
100
99
98
97
96
95
94
93 2009/08/06 15:30 3-03 NG
High Voltage
Supply
20V
Ex.
：
Break down of High
Voltage Power Supply
92
2009/08/06
15:25
2-02
NG
USB
Abnormal
2
1
2008/07/06
15:25
3-10
NG
FAN Operation
Stop
Ex.
：
FAN Break down
*1 When GPS is connected, the date and time are automatically recorded. Set "Time" by the menu when you turn on the power
supply when you do not connect the navigation equipment such as GPS. Input Menu/Time Adjustment/Date and time.
*2 Warning information (maker technological information) that is not on the self test screen might be displayed.

JRC JLN-652 Specifications

General

Brand	JRC
Model	JLN-652
Category	Measuring Instruments
Language	English