JRC JLN-652 - Menu Table; Standard Menu

12-3
12
12.1 Menu table
12.1.1 Standard Menu
（１）
MENU
Menu
･LANGUAGE／言語 日本語 ENGLISH 
Japanese or English display is selected.
･BRIGHTNESS HIGH LOW BACK COLOR SETTING≫

The color arrangement of the screen of daytime and the
night is set.
･ALARM VOLUME OFF 1 2 3 
Alarm is stopped with the [BUZZER] key.
･TIME ADJUSTMENT ≫ 
When GPS is connected, it is not necessary to set.
･SETTING ASSIST OFF ON 
It is the menu for the service man.
･INITIAL SETTING ≫ 
The setting of installing and the CF card, etc. are set.
･MEASURE SETTING ≫

The direction standard, the ship speed measurement
mode, and alarm, etc. are set.
･PICTURE SETTING
CURR≫ SHIP≫ PLOT≫ GRP≫ FISH≫
PRO≫

Drawing in the table and the graph displayed according
to the screen is set.
･MENU DISPLAY DISPLAY EXIT PREVIOUS

EXIT
：
The menu is ended.
PREVIOUS
：
It returns to
the previous menu.
･HELP／ﾍﾙﾌﾟ ≫ PUSH ENT KEY／入力ｷｰ押す 
Supplementary explanation of the menu.
（２）
TIME ADJUSTMENT
･YEAR 2011
･MONTH 07
･DAY 30
･HOUR 15
･MINUTE 54
･SECOND 00
･ADJUST CANCEL OPERATE
MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（３）
BRIGHTNESS
･HIGH LIGHT･BACK COLOR BLACK DARK.BLUE GRAY WHITE
･LOW LIGHT･BACK COLOR BLACK DARK.BLUE GRAY WHITE
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（４）
INITIAL SETTING
･OUTLINE OF THE OPERATION ≫
･INSTALLATION SETTING ≫
･DISPLAY MODE MEASUREMENT DUMMY
･SOFTWARE VERSION ≫
CF CARD 2 SETTING
･MEMORY DATA COPY AND ERASE ≫
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（５）
SOFTWARE VERSION
･MAIN R1.01.46 (sample)
･SIGNAL PROCESSOR R0100_R0100_R0100_R0100_ (sample)
･KEYBOARD R 1.5 (sample)
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（６）
MEMORY DATA COPY AND ERASE
･LOAD DATA CANCEL OPERATE
･SAVE DATA CANCEL OPERATE
･ERASE DATA CANCEL OPERATE
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
MENU / TIME ADJUSTMENT≫
Refer to 3.1.1 “Power ON and Date/Time Setting”.
MENU / BRIGHTNESS / SETTING ≫
Refer to 3.3.3 “Changing the Display color of Screen at
Daytime and Night”.
MENU / INITIAL SETTING ≫
Refer to 7.2 “Initial Setting”.
MENU / INITIAL SETTING ≫MEMORY DATA COPY
AND ERASE
Refer to 7.2.5 “Memory Data Copy and Erase”.
MENU / INITIAL SETTING ≫ SOFTWARE VERSION
Refer to 7.2.4 “Software Version Information”.
Note: The version number described in the menu is an
example of the display.
Confirm version information with a real machine.