EasyManua.ls Logo

JRC JLN-652 - Unit Setting; Display Setting

JRC JLN-652
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-4
3. Water Temperature Sensor
Function It selects it from Disconnection/Connection. (*1)
When Disconnecting it, the water temperature data and the water temperature graph are
not displayed on the display, and the part of it becomes blank.
Operation Standard Menu:Installation settingmenu/3.Water temperature sensor: Disconnection
4. Wind Anemometer (Measuring for wind direction and wind speed)
Function It selects it from Disconnection/Connection. (*1)
When Disconnecting it, the wind direction and wind speed data and their graph are not
displayed on the display, and the part of it becomes blank.
Operation Standard Menu:Installation settingmenu/4.Wind Anemometer: Disconnection
7.1.3 Unit Setting
Depth Unit
Function It selects it from m/fathom(FM).
The unit of the display depth of the current measurement depth of layer and the Fish
Finder screen is selected.
The unit of depth is common to the [CURR] screen and the [FISH] screen and set.
Operation Standard Menu:Installation settingmenu/Depth unit: m
Wind Velocity Unit
Function It selects it from m/sec / kn.
The unit of the display of the wind speed data is selected.
It is necessary to connect anemometer (*1) to display the wind speed.
Operation Standard Menu:Installation settingmenu/Wind Velocity unit: m/sec
7.1.4 Display Setting
Letter Size
Function It selects it from Normal/Wide.
When the Wide type is selected, the numerical data of the screen display, the table, and
the character in the graph are made bold character. (*2)
Operation Standard Menu:Installation settingmenu/Letter size: Normal
Menu Screen Transparency
Function It selects it from 0/1/2/3.
The permeability of the menu panel displayed by the half penetration is selected.
0: It is permeability 0. The background of the menu panel is painted out with the black.
3: The permeability is the maximum. It is possible to set it by penetrating the menu panel
while seeing the display in the back.
Operation Standard Menu:Installation settingmenu/Menu Screen Transparency: 2
*1 Readable NMEA input sentence list Refer to 11.1 “Specifications”.
*2 The character of the menu is not changed in "Normal" size.

Table of Contents

Related product manuals