7-5
Movement of Menu Screen
・Function・ The display position can be moved in "Selection frame menu". (*1)
Operation When "Selection frame menu" is displayed, the menu panel moves whenever the [PLOT]
key on the keyboard is pushed.
Movement zone: Fixed position → Upper the left → Upper the right → Under the right
→ Under the left → Fixed position → ･･･
Tidal Current Direction
・Function・ It selects from the [Tide is Flowing] or the [Tide is Coming].
When the current direction is displayed, It selects from the ①[Tide is Flowing] or the ②
[Tide is Coming]. The current direction is displayed [Tide is Flowing] usually.
In the example of Figure 7.1.1a, the ship sails to the north, and flows from the direction
where the current is 30°, flows in the direction of 210°, and has left. In this case, the
vector display of "Tide is Flowing" and "Tide is Coming " is as follows.
Tide is Flowing: The current flows in the current when the vector is displayed and the
vector is displayed in the left direction. In the example of Figure 7.1.1b, it is displayed on
the circle graph, "Current speed 1.3kn/bearing 210°".
Tide is Coming: The current flows in the current when the vector is displayed and the
vector is displayed in the come direction. In the example of Figure 7.1.1c, it is displayed on
the circle graph, "Current speed 1.3kn/bearing 30°".
Operation Standard Menu: “Installation setting” menu/Tidal Current Direction: Tide is Flowing
Fig. 7.1.1a Fig. 7.1.1b Fig.7.1.1c
*1 The selection frame menu is displayed to push the [MENU] key after "Frame" is displayed pushing the
[□] key. A standard
menu cannot be moved. A fixed display is done in the center part on the screen.
：
Current：1.3 kn / 30°
When the tide of 1.3kn flows
from the direction of 30°
Display of direction that
flows and is left
Display of direction that
flows and is come
To Next Page
Loading...