4-33
4.5.4 Wind direction/Speed Graph Setting
・Function・ The elapsed time of the wind direction/wind speed vector in each vertical line of the graph
time axis are displayed. (*1)
The setting of the time axis is common with current/depth graph.
The vector display interval in the graph is common with current/depth graph.
Refer to "Vector Density" of current/depth graph setting.
Operation Standard Menu: [MENU] key/Menu screen/Picture setting≫/ [GRAPH] screen ≫/[ENT]
key/"Graph Picture setting" menu
Selection Frame Menu: [□] key/ Enclose “Wind direction and Wind speed graph” with the
frame /[MENU] key/ "Wind Vector Graph" menu
Wind Vector Length
・Function・ The vector length of the wind direction and the wind speed are set in the graph.
Setting value: [ 0.5 1 2 ] mm/(m/s)
It is displayed that the maximum Wind speed display in the above table is exceeded in red
though the vector color is green.
Operation Standard Menu: "Graph Picture setting" menu/Wind vector length:1 mm/(m/s)
Selection Frame Menu: "Wind Vector graph" menu/Wind vector length:1 mm/(m/s)
Wind Vector Graph
・Function・ The Wind Vector graph display can be erased by selecting non-display.
Setting value: [ Display ON OFF]
The amount where the Wind Vector graph disappeared expands current/depth graph and
is displayed.
Operation Standard Menu: "Graph Picture setting" menu / Wind Vector Graph: Display ON/OFF
*1 It is necessary to connect the wind direction and wind speed sensor for the display of the wind direction and wind speed graph.
［
ｓ
］
０．５
１
２
ｓ
４０
２０
１０
To Next Page
Loading...