JRC JLN-652 - Selection Frame Menu

12-9
12
12.1.2 Selection Frame Menu
（１）
DISP. MODE / PICTURE / DIRECTION MODE
･DISPLAY MODE MEASUREMENT DUMMY
･DIRECTION STAND. NORTH UP HEAD UP
･PICTURE SETTING CURR≫ SHIP≫ PLOT≫ GRP≫ FISH≫ PRO≫
･BRIGHTNESS HIGH LOW BACK COLOR SETTING
･ALARM VOLUME OFF 1 2 3
･ALARM DISP ON OFF
･WARNING DISP ON OFF
･TIME ADJUSTMENT ≫
･INITIAL SETTING ≫
･MEASURE SETTING ≫
･LANGUAGE/日本語 日本語 ENGLISH
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP/ﾍﾙﾌﾟ ≫ PUSH ENT KEY
（２）
CURRENT SPEED AND DIRECTION / RELATIVE CURRENT LAYER
･BEARINGS N･E･S･W 360°
･ABSOLUTE CURRENT STANDARD DOPPLER GPS GPS AT W.T
･RELATIVE CURRENT STANDARD A B C D E
･C. SPEED ALARM･L OFF kn :SELECT WITH / KEY
DEPTH SETTING: SET WITH KEY
･A LAYER 12 m TOP LOCK
･B LAYER 20 m
･C LAYER 30 m
･D LAYER 50 m
･E LAYER 100 m BOTTOM LOCK
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（３）
CURRENT CIRCLE GRAPH
･BEARINGS N･E･S･W 360°
･C. SPEED RANGE AUTO 1 2 4 6 8 10 kn
･CURRENT VECTORS DISP.ON/OFF ≫
･SHIP SPEED VECTORS DISP ON OFF
･GRAPH SIZE NORMAL LARGE
･WIND DIRCTION MARK DISP. ON OFF
･C. SPEED ALARM･L OFF kn :SELECT WITH / KEY
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（４）
CURRENT VECTORS DISPLAY ON / OFF
･ABSOLUTE CURRENT VECTOR A DISP ON OFF
･ABSOLUTE CURRENT VECTOR B DISP ON OFF
･ABSOLUTE CURRENT VECTOR C DISP ON OFF
･ABSOLUTE CURRENT VECTOR D DISP ON OFF
･ABSOLUTE CURRENT VECTOR E DISP ON OFF
･RELATIVE CURRENT VECTOR A DISP ON OFF
･RELATIVE CURRENT VECTOR B DISP ON OFF
･RELATIVE CURRENT VECTOR C DISP ON OFF
･RELATIVE CURRENT VECTOR D DISP ON OFF
･RELATIVE CURRENT VECTOR E DISP ON OFF
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（５）
SHIP SPEED DISPLAY
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
□ / [DISP. MODE / PICTUER / DIRECTION.
MODE] SELECTING / MENU
Refer to 4.1 “Measurement Setting and Current
Display”.
□ / [CURRENT SPEED AND DIRECTION /
RELATIVE CURRENT] SELECTION] / MENU
Refer to 4.1 “Measurement Setting and Current
Display”.
▲ ▼
□/ [CURRENT CIRCLE GRAPH] SELECTION /
MENU
Refer to 4.2.1 “Current Circle Graph Setting”.
▲ ▼
□/ [CURRENT CIRCLE GRAPH] SELECTION /
MENU / CURRENT VECTORS DISPLAY ON /OFF
≫
Refer to 4.2.1 “Current Circle Graph Setting”.
□ / [SHIP SPEED DISPLAY] SELECTION / MENU
Refer to 4.3 “Ship Speed Display Setting”.