3-4
3.1.1 Power ON and Date/Time Setting
● Execute to turn on the power supply again after thirty seconds or
more have passed since the power supply was intercepted.
●The current meter might power off or malfunction when the ship
power supply failure while the current meter is working. At that time,
please turn on the power supply again.
1 Confirm the ship power supply ON.
2 Push [PWR] key.
The power supply of the device enters, and normal screen (*1) is displayed.
It transmits automatically at the same time as displaying the screen, and the measurement begins.
3 Set the date and time. (*2)
* When GPS is connected, this operation is unnecessary because it is set by the automatic
operation.
1) Push [MENU] key, the menu is displayed.
2) Select Time Setting ≫ by ▼▲ key. Then, open the sub-menu “Time Setting” by pushing
[ENT] key.
3) According to menu items, enter the present Year/Month/Date/Hour/Minute/Second by numeric
ke y.
Ex.) Setting of Month: In case of October, "10" is input by numeric key, [ENT] key is pushed,
and it fixes.
4) After inputting Year/Month/Date/Hour/Minute/Second, finally select the item of “ Setting
Execute” by ▼▲ key and key. Then, push [ENT] key, and it fixes.
5) The menu is ended pushing the [MENU] key again.
*Set "Date and Time" at that time when you turn on the power supply.
3.1.2 Display Selecting
The display is selected with the screen selection key to the keyboard.
1) [CURR] key: Current screen (*3) is displayed.
2) [SHIP] key: Ship speed screen (*4) is displayed.
3) [PLOT] key: Track screen (*5) (current vector on the ship track) is displayed.
4) [GRAPH] key Graph screen (*6) (passage graphs of the current, ship speed, and depth, etc.) is
displayed.
5) [FISH] key Fish finder screen (*7) (reflection in the sea echo such as shoals of fish) is
displayed.
*Ship speed and the current cannot display the measurement on the fish finder
screen.
6) [PROFILE] key Profile screen (*8) (measurement graph of the multilayer current) is displayed.
*1 Normal Screen: When the factory is shipped, "current 1 screen" is displayed. Next time, the screen displayed at the end
(power supply determination) is displayed.
*2 Setting Date /Time: In case of not setting he Date/Time, the misdate time is saved when the measured current data is
memorizing saved.
*3 Current Screen: Refer to 2.2.1 “Tidal Current Display”. *4 Ship Screen: Refer to 2.2.2 “Ship Speed Display”.
*5 Plot Screen: Refer to 2.2.3 “Track Plot Display”. *6 Graph Screen: Refer to 2.2.4 “Graph Display”.
*7 Fish Screen: Refer to 2.2.5 “Fish Finder Display”. *8 Profile Screen Refer to 2.2.6 “Tidal Profile Display”
▲
▼
▼
▼
To Next Page
Loading...