JRC JLN-652 - Page 129

6-5
6
・Setting of Relative Current Standard
・Function・ When a relative current is measured, the based current layer is selected.
For instance, when E layer is set to the standard layer of drum, A layer, B layer, C layer,
and D layer are displayed respectively based on E layer as "AE", "BE", "CE", and "DE".
Operation Standard Menu: [MENU] key/Menu screen/Measure setting≫/[ENT] key/Relative current
standard: A-E Layer
Selection Frame Menu: [□] key/ Enclose “Current direction/Current speed” with the frame
/[MENU] key/”Current speed and direction/relative current layer” menu / Relative current
standard: A-E Layer
Fig. 6.1.3 Example of Absolute Current and Relative Current Graph Display
Ａ
Ｂ
Ｅ
Ａ
Ｂ
Ｅ
Current of
A layer
seen from
E layer
Current of
B layer
seen from
E layer
ＡＥ
ＢＥ
Absolute Current Graph
Relative Current Graph
(based on E layer)
Current of each A and
B layer seen from E layer