9-11 
 
JLN-650 / 652 Current Meter Malfunction Confirmation List 
 
(Asking)  Please contact about  the repairing or ordering, and after confirming and filling in the 
following item.   
Please inquire to the mother ship, and fill it in as accurately as possible when there is an 
uncertain item upon filling in. 
 
  Ship Name     
  TEL.     
  Fax.     
  Model  JLN-650 / JLN-652   
  Production No.     
 
Please confirm the following confirmation item in numerical order, and apply the check mark (✓) to the 
side where either "Yes" or "No" corresponds.   
Please fill it in as specific as possible on "Other content" of the end when not corresponding to either. 
 
 
No.  Confirmation Item  Result 
 
 
The power supply doesn't turn on. (When the key on the keyboard is 
pushed, the touch sound is not generated. ) 
 Yes   No 
 
 
Nothing is displayed in the indicator though the power supply is turned 
on and the operation sound rings. 
 Yes   No 
 
 
The power supply doesn't turn off. 
 Yes   No 
 
 
The display doesn't change like the first stage screen. 
 Yes   No 
 
 
An warning and the update screen are displayed next to an initial screen. 
 Yes   No 
 
 
When using it, a warning is displayed usually. 
 Yes   No 
 
  Nothing is displayed on the [FISH] screen. 
 Yes   No 
 
 
The sensitivity of a specific screen is low among four screens of the 
[FISH] screen. 
 Yes   No 
 
 
Among four screens, a lot of noises of the [FISH] screen are displayed 
on a specific screen. 
 Yes   No 
 
 
The color is displayed to 400m of current 3 echo display in the quay 
excluding the backing color(First color) and Second color. 
 Yes   No 
 
  Depth in bottom of the sea is not displayed shallowly of 250m or less. 
 Yes   No 
 
  The bottom tracking speed is not displayed. Or, the error is large. 
 Yes   No 
 
 
A Port/Starboard ship speed at the bottom tracking speed is always 
biased to one direction and it is displayed. 
 Yes   No 
 
  The water tracking speed is not displayed. Or, the error is large. 
 Yes   No 
 
  The current is not displayed. Or, the error is large. 
 Yes   No 
 
  The current is biased in a specific direction of the ship and it is displayed. 
 Yes   No