Jungheinrich EFX 413 User Manual

Adjusting the backrest
Procedure
• Sit on the driver’s seat.
• Pull the lever (142) to adjust the backrest.
• Adjust the backrest tilt.
• Release the lever (142) again. The backrest is locked.
The backrest is now set.
Adjusting the seat position
CAUTION!
An unsecured driver's seat can cause injury
An unsecured driver's seat can slide out of its guide during travel, resulting in
accidents.
u
The driver's seat must be locked in position.
u
Do not adjust the driver’s seat while travelling.
Procedure
• Sit on the driver’s seat.
• Pull up the driver’s seat locking lever (144) in the direction of the arrow.
• Push the driver’s seat forwards or backwards to the desired position.
• Engage the driver’s seat locking lever (144) in position.
The seat position is now correctly set.
Adjusting the Armrest
Procedure
• Adjust the tilt of the armrests (141) by turning the adjusting wheel (145).
The armrest (141) has been adjusted.
124
04.19 en-GB

Jungheinrich EFX 413 Specifications

General

Brand	Jungheinrich
Model	EFX 413
Category	Trucks
Language	English