Ground and ground conditions
The ground on which the trucks are used must be level and smooth. There must not
be any gaps, drainage systems etc. in this area.
The ground must be well maintained to keep it free of contamination, obstacles and
liquids that could affect the safe operation of the truck.
CAUTION!
There must be no ramps or inclines in areas where forklift trucks are used.
NOTICE
Static charge can cause material damage to truck components
When the truck is operated on a surface with a shunt resistance in excess of 10
6
Ω,
static charge can result in damage to electric components (controller, control
panel, ...).
u
Operate the truck only on surfaces with a shunt resistance of less than 10
6
Ω.
u
The anti-static conductor must be in contact with the ground during operation.
133
04.19 en-GB
To Next Page
Loading...
Need help?
General
