Procedure
• In the driver's display (107) you will be
prompted to enter your 5 digit access
code. Enter the access code, to do this:
Z
Unless the correct access code is
entered, none of the truck's functions will
work.
• Press the "Select" button (151) in the
cursor field.
• Enter your 5 digit access code with the numerical keypad (112). The cursor
keys (150,152) can be used to enter each digit of the 5-digit access code:
- Cursor key (152): one digit forward.
- Cursor key (150): one digit back.
• Press the "CE" key (154) to cancel entering the 5 digit access code.
• Press "OK" (153) and confirm the access code entry.
Z
If no travel, steer or hydraulic operations are performed within a factory-set
interval, the driver's display (107) will prompt you again to enter the 5 digit access
code with the numerical keypad (112). In addition all truck functions are inhibited.
When you have entered the access code the truck will be operational. The interval
can be changed by the manufacturer's customer service department.
The truck is now operational. The steering is in the straight-ahead position.
141
04.19 en-GB
To Next Page
Loading...
Need help?
General
