Requirements
– Prepare the truck for operation, see
page 138 or see page 139.
Procedure
• Press the dead man's switch (20).
• To raise the load handler:
• Turn the "hydraulic functions" control
lever (113) clockwise.
• To lower the load handler:
• Turn the "hydraulic functions" control
lever (113) anticlockwise.
The load handler is being raised/lowered.
Z
The lift and lowering speeds are proportional to how far the "hydraulic functions"
control lever (113) is moved. The maximum lift speed is reached when the
attachment is in the home position.(see page 192).
174
04.19 en-GB
To Next Page
Loading...
Need help?
General
