4.15.3
Manual synchronised rotation until forks are in centre position (o)
Z
The "synchronised rotation until forks are in
centre position" function rotates the fork
carriage through 90° from the home
position and positions the attachment in the
centre of the swivel traverse frame.
Requirements
– Prepare the truck for operation, see
page 138 or see page 139.
Procedure
• Do not press the dead man's switch (20).
• Press the key (104) under the
"synchronised rotation menu change"
symbol (173).
The display changes from the menu item
“synchronised rotation menu
change” (173) to “synchronised rotation
until forks are in centre position” (176).
Z
The rotation speed is preset. The
traverse speed is proportional to how far
the "hydraulics function" control
lever (113) is moved. "Synchronised
rotation until forks in centre position" can
be cancelled by releasing the (104) key
or the "hydraulic functions" control
lever (113). The attachment must then
be moved manually to the home
position.
187
04.19 en-GB
To Next Page
Loading...
Need help?
General
