Emergency Stop safety feature
– If an error is detected by the controller the truck automatically brakes to a halt.
Control indicators on the driver’s display indicate the emergency stop. Each time
the truck is switched on, the system performs a self test which only releases the
parking brake (emergency stop) if the functional test is positive.
Drive system
– Vertically mounted, heavy-duty and maintenance-free threephase motor with no
wear parts. The motor is directly attached to the single-wheel driving gear,
ensuring rapid and trouble-free maintenance.
Brake system
– The operator can brake the truck gently and without causing wear by easing off
the travel pedal or by pressing the brake pedal gently. This feeds energy into the
battery (service brake).
– The electromagnetic spring pressure brake acting on the drive motor serves as
both parking and handbrake. The parking brake is electrically released and
actuated through spring pressure.
19
04.19 en-GB
To Next Page
Loading...
Need help?
General
