Steering
– Extremely smooth steering with threephase drive system (sturdy and
maintenance-free threephase motor with no wear parts).
– The steering wheel is integrated in the control panel. The position of the steered
drive wheel is shown in the driver's display. The maximum steer angle is ± 90°.
– In rail guidance mode the drive wheel is set to the straight-ahead position by
pressing a button. Manual steering is deactivated in this mode (o).
– When wire guidance mode is activated, the steering is assumed by the truck
controller when the guide wire is detected. Manual steering is deactivated in this
mode (o).
Controls and displays
– Ergonomic controls ensure fatigue-free operation for sensitive application of the
travel and hydraulic operations.
– Soft keys to control functions (attachment traverse, fork carriage rotate ...) and
menus.
– Coloured driver's display unit displays all information of importance for the
operator such as steering wheel position, overall lift, truck status reports (e.g.
faults), service hours, battery capacity, time and wire-guidance status etc.
–
Control panel with adjustable height and depth (t).
20
04.19 en-GB
To Next Page
Loading...
Need help?
General
